Can I run Bright with NoMachine on the head node?
NX by NoMachine has been used by some of our customers without issues. On thing you will have to note...
- Home
- installing
-
-
Installing NVIDIA DGX software stack in Bright software images
This article has been split into a number of new articles that are specific to a Linux distribution: Installing NVIDIA... -
General considerations for installing a Bright DGX cluster
Loading the correct kernel modules If you are going to use the built-in gigabit Ethernet interface as your internal cluster... -
Installing NVIDIA DGX software stack in Bright RHEL7 software images
This document describes the procedure for installing the official Nvidia DGX software stack in a Bright RHEL7 software image. The... -
Installing NVIDIA DGX software stack in Bright RHEL8 software images
This document describes the procedure for installing the official Nvidia DGX software stack in a Bright RHEL8 software image. The... -
Installing NVIDIA DGX software stack in Bright Ubuntu 20.04 software images
This document describes the procedure for installing the official Nvidia DGX software stack in a Bright Ubuntu 20.04 software image.... -
Installing and operating slurmrestd
slurmrestd is a stateless REST compatible API to the slurm control plane. This article will go over the steps to... -
Configuring Nvidia Bright Cluster Manager as an Infiniband-only cluster
Caveats This information is valid at the time of writing (9.2-6 release). Currently, the installation of a cluster requires an... -
How to deploy Longhorn on top of a Bright cluster
This document is tested on BCM10 with Ubuntu 22.04 Preparation 1. We will start with deploying kubernetes latest version, using... -
Kubernetes 1.29.6 setup on BCM 10.24.07 Airgapped
1. Prerequisites and Requirements We will setup the following: Kubernetes version: v1.29.6 Base Command Manager (BCM) version: 10.24.07 On Linux... -
Kubernetes 1.30.5 setup on BCM 10.24.09 Airgapped
1. Prerequisites and Requirements We will setup the following: Kubernetes version: v1.30.5 Base Command Manager (BCM) version: 10.24.09 On Linux... -
Kubernetes setup on BCM 10.24.11 Airgapped
1. Prerequisites and Requirements We will setup the following: Kubernetes version: v1.31.2 (default), v1.30.6 or v1.29.10 Base Command Manager (BCM)...