How do I configure a generic node as an external DNS entry on the head node?
A non-managed bright node is a generic device that is not provisioned or otherwise configured by Bright. A generic device...
- Home
- configure
-
-
How do I configure Kubernetes to use NVIDIA GPUs on a Bright 8.0 cluster?
Warning: this article is specifically intended for Bright 8.0. For instructions on enabling GPUs in Kubernetes for more recent versions... -
How do I configure Bright to authenticate against an external NIS server?
The examples in this article assume: A Type 1 network. A Type 1 network is the networking layout where basically... -
How can I configure Isilon’s DNS and NFS with Bright?
DNS setup for use with Isilon SmartConnect Isilon OneFS: How to create a UNIX-based BIND DNS setup for use with... -
How can I configure a dedicated cloning network in an HA cluster?
Introduction There are situations where configuring a dedicated cloning network on your headnode HA is required, or would be useful.... -
How do I configure CephFS?
This article explains how to configure CephFS on a Bright Cluster. This procedure has the following requirements: Bright Cluster Manager... -
How do I configure BeeGFS on demand?
BeeOND (“BeeGFS OnDemand”, pronounced like the word “beyond”) was developed to enable easy creation of one or multiple BeeGFS instances... -
How do I configure Manila in Bright OpenStack 8.0/8.1?
This article explains how to deploy the Manila file sharing service in a Bright Openstack cluster. In this deployment CephFS... -
How do I configure cloud nodes on the fly?
This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may... -
How do I configure my hardware RAID controller from an initialize script?
This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may... -
How do I integrate ZFS with Bright?
This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may... -
How do I configure Grafana for Bright 8.1
This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may... -
How do I configure BeeGFS to run on an InfiniBand interface?
How do I configure BeeGFS to do native IB rather than IP over IB? This article is being updated. Please be... -
How do I configure Bright to manage a Self Encrypted Drive (SED)?
This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may... -
How do I configure PBSPro HA with DRBD?
Bright Cluster Manager does not support HA (High Availability) for PBSPro when the shared storage used is DAS or DRBD.... -
How do I configure SLURM Fair Shares?
SLURM Fair Sharing can be configured using the sacctmgr tool. The following example illustrates how 50% Fair Sharing between two...