The Built-in Power Control is Failing After Upgrading the Firmware of iLO4 to version 2.30 Bright uses the locfg.pl script, which comes...

The procedure below can be used to upgrade a Bright 6.0 or 6.1 or 7.0 or 7.1 installation with failover...

The procedure below can be used to upgrade a Bright 6.0 or 6.1 or 7.0 or 7.1 or 7.2 or...

Upgrading with a Storage Node Special considerations must be made when upgrading Bright versions with a storage node internal to the...

Upgrades to Bright 8.2 are now supported for the following Linux distributions and Bright versions.  Supported Linux distributions and Bright...

The upgrade procedure was originally published in parallel with Bright 9.0-6.  This is now available. Please take the time to...

This article is being updated. Please be aware the content herein, not limited to version numbers and slight syntax changes, may...

How do I upgrade from Bright 6.0/6.1/7.0/7.1/7.2 to Bright 7.3? The procedure below can be used to upgrade a Bright...

The upgrade procedure was originally published in parallel with Bright 9.1-7.   Please take the time to completely read the...

August 2021: Due to recently uncovered security issues there is a need to update cmdaemon and cuda-dcgm to mitigate known...

This article will go over the steps needed to upgrade the Bright provided SLURM packages to a newer major version...

The upgrade procedure was published in parallel with Bright 9.2-8.   Please take the time to completely read the following...

Preamble There are several paths available for upgrading the operating system of a BCM Cluster. In this article, we will...