Categories

ID #1152

How do I configure my hardware RAID controller from an initialize script?

How do I set up a hardware RAID controller from an initialize script?

 

An initialize script is used when custom commands need to be executed before checking partitions and mounting devices. For example, to initialize some not-explicitly-supported hardware, or to do a RAID configuration lookup for a particular node. In such cases the appropriate custom commands are added to an initialize script.

Several environment variables are made available to the initialize script. For a complete overview please refer to  Environment Variables Available To initialize And finalize Scripts, in the Administrator's manual (Appendix E.3 in version 6.1).

 

The initalize script might require some executable files e.g. specialized binaries that communicate with the hardware and perform diagnostic or configuration actions.

 

  1. Such files can be placed in a location that will be available to the node-installer such as  /cm/node-installer/opt/<PATH> on the head node.  Then those files and directories will be located in /opt/<PATH> in the node-installer's root directory.
  2. Alternatively such files can be exported as NFS shares and mounted in the node-installers root.

 

The initialize script can be configured for a node category or node group. If both the category of a node and the node group of that node have an initialize script set, then the category-level initialize script is executed first.

 

To set an initialize script for a category in CMSH:

 

[root@ucs-head opt]# cmsh
[ucs-head]% category use usnic
[ucs-head->category[usnic]]% set initializescript <PATH>/raid-config.sh

[ucs-head->category[usnic]]% commit

 

Note that when setting the "initializescript" property the contents of the file are stored in CMDaemon's database. Subsequent changes to the file on the disk will not be applied, unless the "initializescript" property is set again and the updated contents of the file are transferred to the database.

 

 

 

 

#cat raid-config.sh

!/bin/bash

# raid-config.sh

# This is an example initialize script showing how to configure and LSI raid controller and DELL BIOS

# using LSI 's MegaCli utility and DELL's pec.

 

## Mount NFS share

mkdir /nfs-mount

mount <NFS server hostname>:/raid-utils /nfs-mount

 

## Location of  DELL/LSI utilities

PEC=/opt/dell/pec

MEGA=/opt/megacli/MegaCli

BMCTOOL_IPMITOOL_CMD=/cm/local/apps/ipmitool/current/ipmitool

 

# configure the LSI RAID based on the # of drives (currently either 4 or 6)

 

NUM_PV=´$MEGA -adpallinfo -aall | awk -F ":" '/  Disks/{print $2}'´

NUM_LD=´$MEGA -ldinfo -lall -a0 | grep "Target Id" | wc -l´

 

if [ $NUM_LD -ne 2 ]; then                 ## if there are already 2 logical volumes, assume the RAID has already been configured

 

  if [ $NUM_PV -eq 4 ]; then

    $MEGA -CfgClr -a0

    $MEGA -CfgLdAdd -r5[252:0, 252:1, 252:2, 252:3] -sz100GB -a0

    $MEGA -CfgLdAdd -r5[252:0, 252:1, 252:2, 252:3] -a0

  fi

  if [ $NUM_PV -eq 6 ]; then

    $MEGA -CfgClr -a0

    $MEGA -CfgLdAdd -r5[252:0, 252:1, 252:2, 252:3, 252:4, 252:5] -sz100GB -a0

    $MEGA -CfgLdAdd -r5[252:0, 252:1, 252:2, 252:3, 252:4, 252:5] -a0

  fi

fi

 

# Configure BIOS and BMC settings based on platform

PLATFORM=´$PEC/setupbios platform´

if [ $PLATFORM == 'C6220' ]; then

  $PEC/bmc nic_mode set dedicated

  $PEC/bmc set_chassis_power_cap disable

  $PEC/bmc attr set poweron_stagger_ac_recovery 1

  $PEC/setupbios setting set ioat_dma_engine enabled

fi

 

if [ $PLATFORM == 'C6100' ]; then

  $PEC/bmc nic_mode set dedicated

  $PEC/bmc attr set poweron_stagger_ac_recovery 1

  $PEC/setupbios setting set hyperthreading_tech enabled

  $PEC/setupbios setting set remote_access enabled

  $PEC/setupbios setting set terminal_type vt_100

  $PEC/setupbios setting set serial_port_number COM2

fi

Categories for this entry

Tags: -

Related entries:

You cannot comment on this entry